Johnny Joint® Products

Currie's Johnny Joint® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushing in the Johnny Joint® rod ends are made with a high density, "tough 88" urethane that encases the inner ball. Its a very durable material and it is impervious to weather. The special ball is heat treated steel for extra strength. and on the 2" and 2 1/2" models the ball is cross drilled for thru-bolt lubrication. The 3" joint is lubricated via zerk fitting on the outer shell. Outer shells on the 2" and 2 1/2" are heat treated steel. The retaining washers on the 3" are machined out of 4340 chrome moly and feature a snap ring safety machined into the face of them to protect the snap ring safety machined into the face of them to protect the snap ring from coming out. 2" joints include a 7/16" greaseable thru-bolt, and the 3" joint accepts but does not include a 3/4" bolt. 2" joints are also available with a 3/4" RH threaded stud welded to them. The 2 1/2" joints are available in a forged version with either 1" RH or LH threads or 1 1/4" RH or LH threads, and the 2" joints are available in a forged version with 3/4" RH or LH threads.

This new tool from Currie is designed to make the assembly and disassembly of our popular 2 ½” Johnny Joint® rod ends simple! Tool can be used either in a bench vise, or it can also be used on the vehicle for repairs and rebuilds of Johnny Joints®. Construction is CNC machined heat treated steel components, ½”-13 all-thread, and premium thrust bearings. Tool is completely rebuildable, and all parts are available through Currie. Tools sold each - multiple tools in picture for illustration purposes only!

 CE-9110T 2 ½” Johnny Joint® Assembly / Disassembly Tool

This new kit from Currie allows our 2" Johnny Joints® to be installed on stock or most aftermarket housing in place of the standard control arm bushing that mount into the housing of the 1997-2006 Jeep TJ/LJ and 1987-2001 Jeep XJ/MJ. Kit includes Johnny Joint® insert for gear case ear and installation tool, as well as 1" thick flame cut steel upright for tube side with Johnny Joint® already installed. This kit has you cut off the top of stock bracket that is on the tube and install new Currie piece into existing bracket base. You then weld the currie piece to the existing bracket base. This allows for no welding to be done on the tube resulting in no warpage of the tube.

  CE-9102K TJ/LJ/XJ/MJ front end housing Johnny Joint® kit

   View Instruction Sheet

Should your Johnny Joints® need rebuilding or damaged parts need replacing, every price is offered individually, as well as some additional pieces for hardcore rock crawlers.