The Currie Exclusive Triangulated System is the ultimate TJ performance package for serious rock crawler's. This
system completely replaces the stock TJ rear end and suspension setup with either a high pinion 9" Ford, Reversed Dana
60, NEW! Currie Reversed 60, or Tera 60 rear axle assembly and all new Currie designed triangleulated suspension components.
It offers many unique features available only with this Currie System. The Top Control Arms eliminate the stock Trac
bar and provide unrestricted movement. The longer Lower Control Arms mount on the back of the axle housing for a neutral
rear suspension. This corrects the geometry to allow for increased travel and less lift than is common with a stock setup.
The Shock Mounts are located on the top of the housing and the top mounts are positioned on the frame forward on the
axle. This configuration enables maximum ground clearance plus more suspension travel. The Sway Bar Mounts are positioned
to utilize the stock Rear Sway Bar. A special high-clearnce Skid Plate raises the back of the engine 2" and works
with both manual and auto transmissions. The lowest portion of the Skid Plate is only 1 2/4" below the frame rails.
The Triangulated Rearend and Suspension System is a complex assembly, requiring a high level of technical skill to be properly installed. It is sold and installed only at Authorized Currie Dealers, or at the Currie facility in Anaheim, California.