| Part # |
Price |
Description |
| CE-0100 |
$74.95 |
Labor
- per hour - 1/2-hour Minimum |
| CE-0101 |
$37.95 |
Straighten
Axle Housing |
| CE-0104 |
$69.95 |
Shorten
Axle Housing, one side (Machined) |
| CE-0106 |
$99.95 |
Shorten
axle housing, both sides (Machined) |
| CE-0106A |
$179.95 |
Retube
Housing with 3" - .188 Wall or Swedged Tube |
| CE-0106B |
$209.95 |
Retube
Housing with 3 1/4" - .250 Wall Tube "V" cut |
| CE-0106C |
$179.95 |
Retube
Housing with 3 1/4" - .188 Wall Tube |
| CE-0107 |
$59.95 |
Cut
and Respline Single Axle 30 or 45 degree |
| CE-0108 |
$99.95 |
Cut
and Respline Pair of Axles 30 or 45 degree |
| CE-0109 |
$84.95 |
Bolt
Pattern Change on Axles, Studs not included (pair) |
| CE-0109A |
$37.95 |
Redrill
Rear Drums or Rotors (pair) |
| CE-0110 |
$119.95 |
Bolt
Pattern Change - 5 1/2" Bolt Circle, studs not included
(pair) |
| CE-0111 |
$149.95 |
Rebuild
Third Member - Disassemble, Hot Tank, and Assemble (no
parts included) |
| CE-0111B |
$137.95 |
Set
Up 9" with ARB - Labor Only (no parts included) |
| CE-0112 |
$159.95 |
Conversion
for Standard Large Bearing Axle to work with Full-Size
Lincoln Disc Brake |
| CE-0113 |
$99.95 |
Set
Up Ring and Pinion - Labor Only (no parts included) |
| CE-0114 |
$379.95 |
Rectangular
Tube Rear Housing Truss (Custom Made) |
| CE-0115 |
$44.95 |
Steelabrate
Housing - Other Parts on Request |
| CE-0116 |
$146.95 |
Powder
Coat Housing, includes: Steelabrating & Prep - Gloss Black
or Semigloss Black only |
| CE-0117 |
$74.95 |
Disassemble
and Hot Tank Rearend |
| CE-0118 |
$74.95 |
Assemble
Rearend (Install Third Member and Axles) |
| CE-0118F |
$149.95 |
Assemble
Full Floating Rear |
| CE-0118S |
$149.95 |
Assemble
Frontend with Knuckles, Hubs, and Brakes (Labor Only) |
| CE-0119 |
$149.95 |
Shorten
Front Housing (with Gusset welded in) |
| CE-0120 |
$39.95 |
Remove
Spring Pads and Grind |
| CE-0121 |
$19.95 |
Remove
and Reinstall Axle Bearing - each (Bearings not included) |
| CE-0122 |
$37.95 |
Disassemble
and Diagnose Third Member (Labor Only) |
| CE-0124 |
$35.95 |
Remove
Shock Mounts and Grind |
CURRIE® CUSTOM REARENDS MENU
Currie
Enterprises offers a complete line of fabrication, modification, assembly,
and installation services of rearends and suspension components for
street, off-road and competition vehicles. All services are provided
by highly-trained Currie technicians - experienced specialists in
drivetrain installation. Services are offered on an appointment-only
basis, and all work is performed at the Currie facility in Anaheim,
California.
Your
Currie Representative will make recommendations and assist you in
selecting the right components.