Menu
Search
Filters
Close
Menu

60-62 Chevy C10 Panhard Rod Kit

Adjustable Panhard Rod kit for 1960 thru 1962 Chevy two-wheel drive C10 trucks

SKU: CE-6062DTBK
$158.00

Kit includes the adjustable length panhard bar with a urethane bushing on the fixed end and adjustable heim joint with jam nut on the opposite end, heavy duty frame bracket with adjustable mounting holes to accommodate different ride heights, housing bracket that sandwiches between the housing trailing arm pad and the trailing arm, a spacer that sandwiches in on the other side to keep the truck sitting level. Includes all necessary hardware and instructions

Kit includes the adjustable length panhard bar with a urethane bushing on the fixed end and adjustable heim joint with jam nut on the opposite end, heavy duty frame bracket with adjustable mounting holes to accommodate different ride heights, housing bracket that sandwiches between the housing trailing arm pad and the trailing arm, a spacer that sandwiches in on the other side to keep the truck sitting level. Includes all necessary hardware and instructions

Related Products
Picture of CE-7000TA - GM C-10 Truck Trailing Arm Pads

CE-7000TA - GM C-10 Truck Trailing Arm Pads

$50.00
GM C-10 Truck Trailing Arm Pads
Customers Also Purchased
Picture of CE-6013W - Stainless Braided Caliper Flex Hose Kit (for Wilwood Brakes)

CE-6013W - Stainless Braided Caliper Flex Hose Kit (for Wilwood Brakes)

$86.00
Stainless Braided Caliper Flex Hose Kit (for Wilwood Brakes)
60-72 Chevy C10 (Trailing Arm) 9-Inch Rearend (2WD)

60-98 Chevy C10 9-Inch Rearend Builder (2WD)

$3,318.00

Complete, ready to bolt-in Currie® 9-inch rearend for 1960 thru 1987 C10 and 1988 thru 1998 1500 two-wheel-drive trucks with 5 or 6-lug bolt pattern.


Select from a broad range of available options and upgrades to configure the perfect rearend for your build.


Details:

  • Currie Centurion High-Strength 9-Inch Notchback Housing with Flush Drain Plug
  • Suspension Bracketry Installed at Factory Locations
  • Currie Sportsman Nodular Iron Gear Case with Daytona Big Bearing Pinion Support
  • 1330 Nodular Iron Pinion Yoke (Big Cap)
  • Currie 31-Spline Axles with Tapered Bearings
  • 5 or 6-Lug Wheel Bolt Pattern with Studs
  • Choice of Differential Type
  • Choice of Gear Ratio
  • Choice of Brake Package
  • Professionally Setup and Shipped Fully-Assembled

*** SELECT OPTIONS TO BUILD AND PRICE ***
Picture of Bolt-On Rear Brake Hose

Bolt-On Rear Brake Hose

$31.00
We are all about making things easy! This brake hose bolts right onto the 3rd. member studs of a 9" style housing and eliminates the need for you to do any welding of brake hose anchoring points onto your new, possibly already powder-coated housing!
Currie complete nodular iron 9-inch third member

Ford 9-Inch Third Member Assembly (31-Spline)

$1,021.00

New, built-to-order Currie 9-inch nodular iron third member set up for 31-spline axles. Options include a choice of differential type, gear ratio, and pinion yoke.


Features:

  • Currie Sportsman Nodular Iron Case with 3.062 Bore
  • Currie Nodular Iron Big Bearing (Daytona) Pinion Support
  • Choice of Gear Ratio, Carrier and Pinion Yoke
  • Includes Red JAZ Protecto Shipping/Storage Case
  • Setup and Assembled by Skilled Professionals

*** SELECT OPTIONS TO BUILD AND PRICE ***
Picture of CE-6019 - Parking Brake Cable Kit for Drum Brakes (Universal)

CE-6019 - Parking Brake Cable Kit for Drum Brakes (Universal)

$148.00
Parking Brake Cable Kit for Drum Brakes (Universal)
Categories
Contacts
  • +1 714-528-6957
  • +1 (Fax) 951-549-0267
Information
Copyright © 2022 Currie Enterprises, Inc.. All rights reserved.