Menu
Search
Filters
Close
Menu

60-8013-35 - Inner Axle Seal for 35-Spline Currie 44, 60 & 70

Previous product60-8013-30 - Front Inner Ax...
Next product70-8013-40 - Inner Axle Sea...

 

 

Inner Axle Seal for Currie 44, 60 & 70 Frontends and Full-Float Rearends with 35-Spline Axles


Spicer Seal PN 36487

SKU: 60-8013-35
Estimated Lead Time: 2 weeks
$25.00

This axle seal is used in all of our Currie® 44, 60 & 70 frontends and rearends with standard tubes and 35 spline inner axles. This seal is 2.625" o.d. on the machined area where is presses into the housing, and 2.035" o.d. on the body of the seal. If your tube i.d. is smaller than 2.035" - your frontend is most likely set up for the 60-8013 expandable seal!.

This axle seal is used in all of our Currie® 44, 60 & 70 frontends and rearends with standard tubes and 35 spline inner axles. This seal is 2.625" o.d. on the machined area where is presses into the housing, and 2.035" o.d. on the body of the seal. If your tube i.d. is smaller than 2.035" - your frontend is most likely set up for the 60-8013 expandable seal!.

Related Products
Picture of 60-8013 - Front Inner Axle Seal - Expandable - for 1 Ton 9" & Heavy Wall Tube Currie 60

60-8013 - Front Inner Axle Seal - Expandable - for 1 Ton 9" & Heavy Wall Tube Currie 60

$22.00

Front Inner Axle Seal - Expandable - for 1 Ton 9" & Heavy Wall Tube Currie 60


Seals-It Seal PN AS1000NP
Picture of 60-8013-30 - Front Inner Axle Seal - 30 Spline Currie 44 & 60

60-8013-30 - Front Inner Axle Seal - 30 Spline Currie 44 & 60

$19.00

Front Inner Axle Seal - 30 Spline Currie 44 & 60


Spicer Seal PN 620257
Customers Also Purchased
Currie Racing Gear Oil GL-6 Non-Synthetic

Currie 9-Inch Racing Gear Oil

$14.00

High-performance non-synthetic racing 85W-140, gear oil meets the API GL-6 specification designed specifically for the requirements of 9-inch gear assemblies. It provides maximum shear stability and extreme pressure protection required to extend the life of your Currie rearend.


Details:

  • Premium Petroleum-Based Racing-Grade Formula
  • Excellent Thermal and Shear Stability
  • High Shock Load and Extreme Pressure Chemistry
  • Designed for High-Offset Hypoid 9-Inch Gear Geometry
  • 85W-140 GL-6 API GL-6 Rated
Picture of 60-8013 - Front Inner Axle Seal - Expandable - for 1 Ton 9" & Heavy Wall Tube Currie 60

60-8013 - Front Inner Axle Seal - Expandable - for 1 Ton 9" & Heavy Wall Tube Currie 60

$22.00

Front Inner Axle Seal - Expandable - for 1 Ton 9" & Heavy Wall Tube Currie 60


Seals-It Seal PN AS1000NP
Picture of Currie 1/2 x 3.0 In. Screw-In Wheel Stud Set

Currie 1/2 x 3.0 In. Screw-In Wheel Stud Set

$20.00

Set of (5) 1/2 x 3.0 in. screw-in wheel studs


Details:

  • 1/2 In. x 20 TPI x 3.0 In. Long
  • Kit Includes (5) Studs and (5) Washers
Picture of Currie 60 & 70 Pinion Seal for 29-Spline Pinion Gear

Currie 60 & 70 Pinion Seal for 29-Spline Pinion Gear

$47.00

Details:


Details:

  • Fits Currie 60 & 60 High-Pinion Front Housings
  • Dual Lip Nitrile Seal
  • Seal Inside Diameter 1.875 Inch
  • Seal Outside Diameter 3.505 Inch

Picture of Dana 60 Ring And Pinion Gear Sets (High-Pinion)

Dana 60 Ring And Pinion Gear Sets (High-Pinion)

$389.00

Starting Price


Details:

  • Reverse Rotation, For High-Pinion Front And Rear Applications
  • 4.56 And Up (Numerically) Are Thick Gears
  • Available In Ratios From 3.54 Thru 5.38
  • 8620 Alloy First Run Steel

*** SELECT GEAR RATIO FOR PRICE ***
Categories
Contacts
  • +1 714-528-6957
  • +1 (Fax) 951-549-0267
Information
Copyright © 2023 Currie Enterprises, Inc.. All rights reserved.