Rear ends are built to match the vehicles stock axle width, pinion offset, suspension mounting locations, and wheel bolt pattern for a straightforward, hassle-free installation
Included Standard Features
 |
|
Currie Centurion Housing - Classic notchback looks in a new, high-strength, American-made housing that features 3-inch diameter axle tubes and CNC machined face flange for a flat leak-free seal - all joined together with strong, attractive welds |
| |
|
|
 |
|
Drain Plug - This standard feature makes routine maintenance so much easier - no more removing the brakes, axles, and the third member for a simple oil change |
| |
|
|
 |
|
Currie Sportsman Case - New nodular iron gear case with Daytona big bearing pinion support and 1350 yoke is the perfect foundation for a performance restomod build - no used or reconditioned parts here! |
| |
|
|
 |
|
Master Bearing Kit - High-quality bearings and performance seals are used throughout to provide a long, trouble-free service life |
| |
|
|
 |
|
60-72 C10 Trailing Arm Pads - Heavy-duty 1/4-inch thick pads are installed in the OEM locations (matched to model year) for bolt-in compatibility with the stock suspension |
| |
|
|
 |
|
73-98 C10/1500 Spring Pads - Heavy-Duty leaf spring pads are installed in the OEM location for bolt-in compatibility with the stock suspension |
| |
|
|
 |
|
Billet Housing Ends - Currie billet late model Ford Torino large bearing housing ends are CNC machined for accuracy and feature provisions for internal or external axle oil seals |
| |
|
|
 |
|
Alloy Axles - Currie Performance 31-spline 1541 alloy axles with tapered axle bearings feature vehicle correct bolt pattern and wheel studs |
| |
|
|
 |
|
Bearing Retainers - Heavy-duty retainers assure positive bearing retention and full seal engagement for a long trouble and leak-free service life |
| |
|
|
 |
|
Assembly - Every rear-end is fully assembled in-house by our skilled professionals and shipped ready to install |
Options To Complete The Build
 |
|
Gear Cases - Select from a range of gear cases in nodular iron or aluminum to match the performance and weight requirements of your build |
| |
|
|
 |
|
Gear Ratio - Select from a wide variety of ratios, Currie uses only the highest quality Motive Gear Performance® series (Orange box) ring and pinion sets in our 9-inch rear-ends |
| |
|
|
 |
|
Differential - Select the differential type that meets your traction needs, including helical gear or clutch-style limited-slip, automatic locking differential, or steel spool |
| |
|
|
 |
|
Brake Package - Select from a range of brake options from classic 11-inch drums to 14-inch Baer and Wilwood disk brakes that are capable of meeting any performance requirement |
| |
|
|
 |
|
REM® Isotropic Polishing - Removes surface imperfections created during the gear manufacturing process. Polishing eliminates the need for a break-in period, decreases friction, reduces operating temps, and removes stress risers. This option helps gears last longer and run quieter |
| |
|
|
 |
|
Powder Coat - Optional powder coat finish adds long-lasting protection against rust and corrosion to keep your rear-end looking its best |
NOTES:
GMC Trucks - Due to frame and suspension variations between model years, please call for a quote
Panhard Bar - The stock factory panhard bar cannot be re-used with this rear end; it requires an aftermarket bar that attaches to the trailing arm which are readily available from most aftermarket suspension manufacturers
Lubrication Requirements - 9-inch rear-ends use a high-offset hypoid gear design requiring severe duty gear oil with API GL-6 rating. Use of oil not meeting the GL-6 rating will prematurely wear gears and bearings and void the Currie Warranty
Aftermarket Brakes - Currie rear ends conform to the ABCS (Aftermarket Brake Configuration Standard). This allows brake kits that use this standard to easily be changed or upgraded without modifying the housing or axles. ABCS brakes use a 2.5-inch brake space with late-model big-bearing Ford housing ends and a 2.80 center hole in the drum or rotor
Wheel Studs - Currie rear ends use standardized-shank Currie Enterprises wheel studs that allow the following wheel studs to be interchangeable in the axles without drilling: 12mm, 7/16, 1/2, and 1/2 x 3-inch competition
