Search
Filters

67-81 Camaro/Firebird Full-Floating 9-Inch Housing And Axle Package With RideTech Brackets


Included In Price:

  • Currie Centurion 9-Inch Notchback Full-Float Housing With RideTech 4-link Brackets Installed
  • Currie Extreme Duty Unit Bearing Full-Float Housing Ends
  • Currie Performance 35-Spline Chromoly Full-Floating Axles
Estimated Lead Time: 3-5 days
*

Width Between Wheel Mounting Surfaces (WBWMS)

*
*
*
$2,867.00
PROP 65 WARNING:

If you are considering RideTech's 4-link coilover suspension system for the back of your 1967-1981 Camaro or Firebird, don't let the rearend stop you!

Currie Full-Floating 9-inch Housing and Axle Packages with RideTech brackets installed, are direct bolt-in assemblies that are available in stock width or narrowed for mini-tubs and are built to match the vehicles stock pinion offset (drive shaft location) and wheel bolt pattern for a straightforward hassle-free installation

Housing and Axle Packages require a 9-inch third member assembly and compatible brake package to complete the rearend. Requires assembly of components prior to installation

 

Included Standard Features

Centurion 9-inch   Currie Centurion Housing - Classic notchback looks in a new, high-strength, American-made housing, that features 3-inch diameter axle tubes, and CNC machined face flange, for a flat leak-free seal - all joined together with strong, attractive welds
     
 RideTech Brackets Installed   RideTech Brackets - Heavy-duty laser cut 4-link and sway bar brackets are installed on the housing for a direct bolt-in fit with your RideTech suspension
     
Pro-Touring Full-Float Housing End   Full-Float Design - Improves rear brake performance by eliminating pad knockback during hard cornering and increases safety by maintaining wheel alignment and retention in the event of an axle failure
     
Extreme Unit Bearing   Full-Float Extreme Duty Unit Bearing - Feature a custom heat treated 4140 chromoly spindle and face flange for the ultimate in strength and durability. Bolt pattern is GM 5 on 4.750 with .5 x 3" studs installed
     
 35-spline Full-Float Axles   Full-Floating Axles - Currie 35-spline full-floating 4340 chromoly axles deliver the strength required for high horsepower street and track use

 

 

Options To Complete The Build

Fill Cap   Fill Cap - Make oil changes easy with the optional high mounted billet aluminum fill cap
     
Drain Plug   Drain Plug - This simple option makes changing the oil so much easier - no more removing the brakes, axles and the third member for a simple oil change
     
Powder Coat   Powder Coat - Optional powder coat finish adds long-lasting protection against rust and corrosion to keep your rearend looking its best

 

Looking for something different? Click on Live Chat or call (714) 528-6957 to speak with an expert to build the custom solution that meets your needs

 

NOTES:

Lubrication Requirements - 9-inch rearends use a high-offset hypoid gear design that requires a severe duty gear oil with API GL-6 rating. Use of oil not meeting the GL-6 rating will damage the gears and bearings and void the Currie Warranty

4-Link Suspension - This rearend is designed for 67-81 F-body vehicles with RideTech 4-link suspension only

Aftermarket Brakes - Currie crate rearends conform to the ABCS (Aftermarket Brake Configuration Standard). This allows brake kits that use this standard, to easily be changed or upgraded without having to modify the housing or axles. ABCS brakes use a 2.5-inch brake space with late-model big bearing Ford housing ends, and a 2.80 center hole in the drum or rotor

Wheel Studs - Currie crate rearends use a standardized-shank Currie Enterprises wheel studs that allow the following wheel studs to be interchangeable in the axles, without drilling: 12mm, 7/16, 1/2, and 1/2 x 3-inch competition

If you are considering RideTech's 4-link coilover suspension system for the back of your 1967-1981 Camaro or Firebird, don't let the rearend stop you!

Currie Full-Floating 9-inch Housing and Axle Packages with RideTech brackets installed, are direct bolt-in assemblies that are available in stock width or narrowed for mini-tubs and are built to match the vehicles stock pinion offset (drive shaft location) and wheel bolt pattern for a straightforward hassle-free installation

Housing and Axle Packages require a 9-inch third member assembly and compatible brake package to complete the rearend. Requires assembly of components prior to installation

 

Included Standard Features

Centurion 9-inch   Currie Centurion Housing - Classic notchback looks in a new, high-strength, American-made housing, that features 3-inch diameter axle tubes, and CNC machined face flange, for a flat leak-free seal - all joined together with strong, attractive welds
     
 RideTech Brackets Installed   RideTech Brackets - Heavy-duty laser cut 4-link and sway bar brackets are installed on the housing for a direct bolt-in fit with your RideTech suspension
     
Pro-Touring Full-Float Housing End   Full-Float Design - Improves rear brake performance by eliminating pad knockback during hard cornering and increases safety by maintaining wheel alignment and retention in the event of an axle failure
     
Extreme Unit Bearing   Full-Float Extreme Duty Unit Bearing - Feature a custom heat treated 4140 chromoly spindle and face flange for the ultimate in strength and durability. Bolt pattern is GM 5 on 4.750 with .5 x 3" studs installed
     
 35-spline Full-Float Axles   Full-Floating Axles - Currie 35-spline full-floating 4340 chromoly axles deliver the strength required for high horsepower street and track use

 

 

Options To Complete The Build

Fill Cap   Fill Cap - Make oil changes easy with the optional high mounted billet aluminum fill cap
     
Drain Plug   Drain Plug - This simple option makes changing the oil so much easier - no more removing the brakes, axles and the third member for a simple oil change
     
Powder Coat   Powder Coat - Optional powder coat finish adds long-lasting protection against rust and corrosion to keep your rearend looking its best

 

Looking for something different? Click on Live Chat or call (714) 528-6957 to speak with an expert to build the custom solution that meets your needs

 

NOTES:

Lubrication Requirements - 9-inch rearends use a high-offset hypoid gear design that requires a severe duty gear oil with API GL-6 rating. Use of oil not meeting the GL-6 rating will damage the gears and bearings and void the Currie Warranty

4-Link Suspension - This rearend is designed for 67-81 F-body vehicles with RideTech 4-link suspension only

Aftermarket Brakes - Currie crate rearends conform to the ABCS (Aftermarket Brake Configuration Standard). This allows brake kits that use this standard, to easily be changed or upgraded without having to modify the housing or axles. ABCS brakes use a 2.5-inch brake space with late-model big bearing Ford housing ends, and a 2.80 center hole in the drum or rotor

Wheel Studs - Currie crate rearends use a standardized-shank Currie Enterprises wheel studs that allow the following wheel studs to be interchangeable in the axles, without drilling: 12mm, 7/16, 1/2, and 1/2 x 3-inch competition

Products specifications
Vehicle Fitment 70-81 GM F-Body Vehicles (Camaro/Firebird) equiped with RideTech 4-link suspension system
Housing Currie Centurion heavy-duty 9-inch full-float housing with 3-inch diameter x .250 wall DOM tube
Housing Ends Currie billet housing ends for unit bearings
Unit Bearings Currie Extreme Duty Pro-Touring full-float unit bearings with heat treated 4140 chromoly spindle and face flange
Axles Currie Performance full-floating 35-spline 4340 chromoly axles
Suspension Brackets RideTech upper and lower 4-link and sway bar brackets installed at the RideTech specified locations
Wheel Bolt Pattern 5 on 4 3/4 with 3 x 1/2" studs installed
Brake Space 2.125 inch axle standoff with 3.0625 inch center register
Width 1967-1969 stock / mini-tub width = 60.250 / 54.750, 1970-1981 Stock / mini-tub width = 61.250 / 56.0 inches between wheel mounting surfaces
Fluid Capacity 3 quarts of 85w-140, non-synthetic (API GL-6 rated only)
PKG1 62,15,13,75 (Housing)
PKG2 44,13,10,40 (Axles)
Products specifications
Vehicle Fitment 70-81 GM F-Body Vehicles (Camaro/Firebird) equiped with RideTech 4-link suspension system
Housing Currie Centurion heavy-duty 9-inch full-float housing with 3-inch diameter x .250 wall DOM tube
Housing Ends Currie billet housing ends for unit bearings
Unit Bearings Currie Extreme Duty Pro-Touring full-float unit bearings with heat treated 4140 chromoly spindle and face flange
Axles Currie Performance full-floating 35-spline 4340 chromoly axles
Suspension Brackets RideTech upper and lower 4-link and sway bar brackets installed at the RideTech specified locations
Wheel Bolt Pattern 5 on 4 3/4 with 3 x 1/2" studs installed
Brake Space 2.125 inch axle standoff with 3.0625 inch center register
Width 1967-1969 stock / mini-tub width = 60.250 / 54.750, 1970-1981 Stock / mini-tub width = 61.250 / 56.0 inches between wheel mounting surfaces
Fluid Capacity 3 quarts of 85w-140, non-synthetic (API GL-6 rated only)
PKG1 62,15,13,75 (Housing)
PKG2 44,13,10,40 (Axles)