Search
Filters

9.5-Inch Gear Third Member Assembly For Upside Down Applications

Complete, ready-to-run, nodular iron third member for upside down applications with 9.5-inch PRO Gear . Options include choice of differential type, gear ratio and pinion yoke


Details:

  • Nodular Iron Case With Ring Gear Load Bolt
  • 3.250 in. Bore Carrier Bearings (35 or 40-Spline Axles)
  • Billet Aluminum Big Pinion Support For Upside Down Applications
  • Standard Rotation 9.5-inch PRO Gear With 35-Spline Big Pinion
  • Setup And Assembled By Skilled Professionals

*** CONFIGURE OPTIONS FOR PRICE ***

SKU: CE-4028DKU95
Estimated Lead Time: 3-5 days
*
*
*
*
*
*

Reduces friction, operating temperature and gear wear

*
$1,463.00
PROP 65 WARNING:

Complete 9-inch third members with 9.5-inch PRO gears are built to the Currie Standard using only the highest quality components available and assembled in-house by our skilled technician

 

9.5-Inch Gear Third Member Features:

 

Gear Case - Nodular iron gear case features a ring gear load bolt to prevent gear deflection, chromoly main caps, and spanner nuts. All held together with ARP fasteners. 3.250 bore carrier bearings for 35/40-spline axles

     
  Load Bolt - Supports the ring gear and prevents it from deflecting under high torque loads to maintain proper gear mesh for improved reliability under severe conditions
     
  Billet Pinion Support - Designed for upside down applications, features a large oil channel for additional lubrication to the front bearing to prevent oil starvation issues, while the improved housing design protects the pinion seal from impact damage with a steel shield plate
     
  9.5-Inch PRO Gears - Machined from 9310 alloy steel and heat-treated for maximum toughness and features a larger 35-spline big pinion for increased torque handling capacity
     
Assembly Labor   Labor - Fully assembled and set up in-house by our skilled professionals

 

Note:

Upside down third members use a standard cut gear and are not the same as a high-pinion third member that use a reverse rotation

Complete 9-inch third members with 9.5-inch PRO gears are built to the Currie Standard using only the highest quality components available and assembled in-house by our skilled technician

 

9.5-Inch Gear Third Member Features:

 

Gear Case - Nodular iron gear case features a ring gear load bolt to prevent gear deflection, chromoly main caps, and spanner nuts. All held together with ARP fasteners. 3.250 bore carrier bearings for 35/40-spline axles

     
  Load Bolt - Supports the ring gear and prevents it from deflecting under high torque loads to maintain proper gear mesh for improved reliability under severe conditions
     
  Billet Pinion Support - Designed for upside down applications, features a large oil channel for additional lubrication to the front bearing to prevent oil starvation issues, while the improved housing design protects the pinion seal from impact damage with a steel shield plate
     
  9.5-Inch PRO Gears - Machined from 9310 alloy steel and heat-treated for maximum toughness and features a larger 35-spline big pinion for increased torque handling capacity
     
Assembly Labor   Labor - Fully assembled and set up in-house by our skilled professionals

 

Note:

Upside down third members use a standard cut gear and are not the same as a high-pinion third member that use a reverse rotation