Vehicle Fitment
|
2020 and newer Jeep Gladiator (JT) truck |
Center Section
|
Extreme 60 Nodular Iron Center Section with thick webbing and reinforcement in critical areas |
Gear Set
|
Dana 60™ standard rotation gear set |
Differential Carrier
|
Standard Dana 60 carrier, Typically 4.56 and higher numerical ratios |
Pinion Yoke
|
1350 u-joint |
Differential Cover
|
Currie nodular-iron cover, Red |
Axle Tubes
|
3.5-inch diameter, .375 wall DOM tube |
Axles
|
Currie Performance double splined full-floating (40-spline 1.7-inch diameter) 4340 heat-treated chromoly |
Floater Spindle
|
Currie Performance 2.5-inch heat-treated 4140 Chromoly spindles |
Floater Hub
|
Currie Performance billet full-floating hubs with 40-spline drive flanges, tone rings installed for ABS and ESP retention |
Brake Rotors
|
13.750-inch 8-lug vented rotors |
Brake Calipers
|
Jeep Gladiator truck OE calipers |
Parking Brake
|
Modified Jeep Gladiator OEM backing plate and parking brake assembly |
Suspension Brackets
|
Heavy gauge 3/16 steel mounting brackets |
Geometry
|
Optimized for lifted vehicles |
Width
|
70-inches wide (between wheel mounting surfaces) |
Wheel Bolt Pattern
|
8-lug (8 x 6.5 in.) with 9/16 studs |
Finish
|
Black satin powder coat |