| Vehicle Fitment | 2007 thru 2018 Jeep Wrangler JK/JKU |
| Center Section | LP60 Nodular Iron low-pinion center section with thick webbing and reinforcement in critical areas |
| Gear Set | Dana 60™ standard rotation gear set |
| Differential Carrier | Standard Dana 60 carrier, Typically 4.56 and higher numerical ratios |
| Pinion Yoke | 1350 u-joint |
| Differential Cover | Currie nodular-iron cover, Red |
| Axle Tubes | 3.5-inch diameter, .375 wall DOM tube |
| Axles | Currie Performance double splined full-floating (40-spline 1.7-inch diameter) 4340 heat-treated chromoly |
| Floater Spindle | Currie Performance 2.5-inch heat-treated 4140 Chromoly spindles |
| Floater Hub | Currie Performance billet full-floating hubs with 40-spline drive flanges, tone rings installed for ABS and ESP retention |
| Brake Rotors | 13.750-inch 8-lug vented rotors |
| Brake Calipers | Jeep Gladiator truck OE calipers |
| Parking Brake | Modified Jeep Gladiator OEM backing plate and parking brake assembly |
| Suspension Brackets | Heavy gauge 3/16 steel mounting brackets |
| Geometry | Optimized for stock height up to 4” of lift |
| Width | 70-inches wide (between wheel mounting surfaces) |
| Wheel Bolt Pattern | 8-lug (8 x 6.5 in.) with 9/16 studs |
| Finish | Black satin powder coat |