Menu
Search
Filters
Close
Menu

10-Inch Gear Third Member Assembly For 40/45-Spline Axle

Previous product10-Inch Gear Third Member A...
Next productTrophy Truck 10-Inch Third ...

 

Complete, ready-to-run, nodular iron third member for 10-inch PRO gears. Options include choice of 40-spline Competition ARB Air Locker or 45-Spline Spool, gear ratio, and pinion yoke


Details:

  • Nodular Iron Case With Ring Gear Load Bolt
  • 3.812 in. Bore Carrier Bearings
  • Accepts Up To 45-Spline, 2.0 in. Axles
  • Billet Aluminum Big Pinion Support
  • 10-inch PRO Gear With 35-Spline Big Pinion
  • Setup And Assembled By Skilled Professionals

*** CONFIGURE OPTIONS FOR PRICE ***

SKU: CE-4028CK
Estimated Lead Time: 3-5 days
*
*
*
*
*
*
$2,159.00

Complete 9-inch third members with 10-inch PRO gears are built to the Currie Standard using only the highest quality components available and assembled in-house by our skilled technicians

 

10-Inch Gear Third Member Features:

 

Gear Case - Nodular iron gear case designed for 10-inch gears. This case features a ring gear load bolt to prevent gear deflection, chromoly main caps, and spanner nuts. All held together with ARP fasteners. 3.812 bore carrier bearings for 45-spline, 2.0 in. axles
     
  Load Bolt - Supports the ring gear and prevents it from deflecting under high torque loads to maintain proper gear mesh for improved reliability under severe conditions
     
  Billet Pinion Support - Features a large oil channel for additional lubrication to the front bearing to prevent overheating on long high-speed runs, while the improved housing design protects the pinion seal from impact damage with a steel shield plate
     
  Steel Spool - 45-spline (2.0" dia. axle) spool is designed specifically to withstand the rigors of high horsepower desert racing
     
  10-Inch PRO Gears - Machined from 9310 alloy steel and heat-treated for maximum toughness the 10-inch PRO is largest and strongest gear available for a 9-inch rearend
     
Assembly Labor   Labor - Fully assembled and set up in-house by our skilled professionals

Complete 9-inch third members with 10-inch PRO gears are built to the Currie Standard using only the highest quality components available and assembled in-house by our skilled technicians

 

10-Inch Gear Third Member Features:

 

Gear Case - Nodular iron gear case designed for 10-inch gears. This case features a ring gear load bolt to prevent gear deflection, chromoly main caps, and spanner nuts. All held together with ARP fasteners. 3.812 bore carrier bearings for 45-spline, 2.0 in. axles
     
  Load Bolt - Supports the ring gear and prevents it from deflecting under high torque loads to maintain proper gear mesh for improved reliability under severe conditions
     
  Billet Pinion Support - Features a large oil channel for additional lubrication to the front bearing to prevent overheating on long high-speed runs, while the improved housing design protects the pinion seal from impact damage with a steel shield plate
     
  Steel Spool - 45-spline (2.0" dia. axle) spool is designed specifically to withstand the rigors of high horsepower desert racing
     
  10-Inch PRO Gears - Machined from 9310 alloy steel and heat-treated for maximum toughness the 10-inch PRO is largest and strongest gear available for a 9-inch rearend
     
Assembly Labor   Labor - Fully assembled and set up in-house by our skilled professionals
Related Products
9-inch oil service kit

9-inch Rearend Oil Service/Install Kit

$65.00
Oil service kit for Ford 9-inch rearends includes 3 liters of Currie 85w-140 Racing Gear Oil, third member gasket and 10 nyloc nuts and aluminum crush washers
Picture of U-Joint Strap Kit For 1350/1410 Yoke

U-Joint Strap Kit For 1350/1410 Yoke

$12.00

Details:

  • Strap Kit for 1350/1410 Series U-Joint With 1.188 in. (1 3/16 in.) Diameter Caps
  • Width 1.666 in. Center To Center
  • Includes Two Straps, And Two Stover Nuts
Picture of U-Joint Strap Kit For 1480 Yoke

U-Joint Strap Kit For 1480 Yoke

$27.00

Details:

  • Strap Kit for 1480 Series U-Joint With 1.375 in. (1 3/8 in.) Diameter Caps
  • Width 1.914 in. Center To Center
  • Includes Two Straps, and Two Stover Nuts
Categories
Contacts
  • +1 714-528-6957
  • +1 (Fax) 951-549-0267
Information
Copyright © 2020 Currie Enterprises, Inc.. All rights reserved.