Search
Filters

Currie Extreme 60 - High-Pinion Jeep Gladiator Axle Set (70 In. Wide, 8-Lug)

The Currie Extreme 60 front and rear axle set for the Jeep Gladiator Truck, is designed for severe off-road use with tires up to 40-inches and V8 horsepower. The high-pinion design features Currie's exclusive rotated center section with ring gear load-bolt, a combination that delivers superior obstacle slide-over and unmatched gear strength. If you seek out the most challenging routes and toughest obstacles to conquer, the Extreme 60 axle set is a natural choice.


Axle Set Details:

  • Fully Assembled Extreme 60 High-Pinion Front And Rear Axle Assemblies
  • 70-Inch Width Provides Improved Clearance For Large Tires
  • 8-Lug Wheel Bolt Pattern For Ultimate Reliability
  • Satin Black Powder Coat Finish For Long Lasting Protection
  • Choice Of Selectable Locker And Gear Ratio

Exclusive Extreme 60 Features:

  • High-Clearance Center Section With Rotated Cover Improves Obstacle Slide-Over
  • High-Pinion Design Raises The Driveshaft By 2-Inches For Additional Clearance
  • Ring Gear Load Bolt Prevents Deflection To Deliver Maximum High-Pinion Gear Strength
  • High Volume Flow-Thru Pinion Oiling System Keeps Bearings Bathed In Cool Oil
  • Rock Slider Low-Friction Skid Plate Sides Over Trail Obstacles With Ease

FOR DIESEL EQUIPED VEHICLES CALL SALES AT (714) 528-6957

SKU: TS650
Estimated Lead Time: 3 to 4 weeks
*
*
$17,499.00

The Extreme 60 high-pinion axle set for the 2020 and newer Jeep Gladiator, includes complete bolt-in front and rear axle assemblies with all required brackets and mounts in place. The vehicle's factory driveshafts will require modification or replacement to accommodate the larger 1350 series u-joint and 60 series housing

 

 

Extreme 60 Axle Features

 

  Extreme 60 high-pinion nodular iron center section is the strongest 60 series casting we offer, with heavier main caps, ARP® main bolts, more reinforcement in critical areas over the already strong Currie 60 center
     
Load Bolt   Ring gear load bolt (top left) eliminates gear deflection, to dramatically increase torque handling capacity. The load bolt typically sits .002 inch from the ring gear and only touches when extremely high torque loads are applied
     
  Extreme 60 high-pinion radius bottom center section delivers unmatched ground clearance, and improved obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
     
  Replaceable AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
     
  High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminating oil starvation issues
     
  Large 3.5-inch diameter .375 wall axle tubes (left) are more than three times stronger than the factory Dana® 44 (right) without being overweight or sacrificing ground clearance
     
Powder Coat   Black satin powder coat finish adds long-lasting protection against rust and corrosion to keep your Currie Extreme 60 looking its best
     
     

Extreme 60 Front Features

 

  Front axle steering geometry is optimized for large tires and lifted vehicles with increased caster and pinion angles
     
  Massive forged 1-ton inner knuckles (right) are designed to stand up to the severe punishment of larger tires without flinching
     
  Upper control arm mounts feature rebuildable Johnny Joints® for maximum suspension articulation with unsurpassed durability
     
  Rock-proof Currie nodular iron front cover protects expensive internals, adds structural support to the housing's face flange and locates the driver’s side upper control arm mount
     
  13-inch diameter vented rotors and dual-piston calipers provide the increased brake capacity required for stopping large tires
     
  Warn® premium manual locking hubs are the industry standard for durability and reliability
     
     

Extreme 60 Rear Features

 

  Desert race-inspired 2-inch heat-treated chromoly spindles and billet steel full-floating hubs carry the weight of the vehicle, eliminating the influence of side loading and impact shock on axle durability. Safety is improved as the wheel and brake remain in place and fully functional in the rare event of an axle failure
     
  Currie Performance double splined full-floating heat-treated chromoly axles provide superior strength and durability over traditional flanged floater axles
     
    Modified JK OEM backing plates and parking brake assemblies provide reliable operation with broad availability of serviceable wear items
     
  Rock-proof Currie nodular iron cover protects expensive internals and adds structural support to the housing's face flange for increased rigidity

 

 

Looking for something different? Click on Live Chat or call (714) 528-6957 to speak with an expert to build the custom solution that meets your needs

 

Notes

ABS Sensors - Does not include ABS sensors, the factory sensors from the stock axle must be retained and installed on the Extreme 60 housing

Computer Programming: 2012 and newer vehicles require a computer programmer to reset the gear ratio and tire height in the vehicle's computer for the proper function of the vehicles stability control and transmission shift points

Brake Upgrade: The big brake kit included with the Extreme 60 uses 13.25-inch rotors with dual-piston calipers to provide the stopping power required for 37-inch and larger tires

Wheel and Tire Size: 17-inch or larger wheels are required for proper clearance of the brake calipers. Maximum recommended tire size is 40-inches

Overall Width: Axle width is 70-inches (+4.6 inches over stock) between wheel mounting surfaces. Additional width improves turning angle with 37-inch and larger tires

Steering Stabilizer: Ram assist brackets are not compatible with and exclude the use of the stock steering stabilizers

Differential Carriers: Carriers provided by Currie for the Extreme 60, are turned down to 8.300" O.D. for load bolt clearance. If a standard O.D. carrier is installed the load bolt will need to be backed out to prevent damage

The Extreme 60 high-pinion axle set for the 2020 and newer Jeep Gladiator, includes complete bolt-in front and rear axle assemblies with all required brackets and mounts in place. The vehicle's factory driveshafts will require modification or replacement to accommodate the larger 1350 series u-joint and 60 series housing

 

 

Extreme 60 Axle Features

 

  Extreme 60 high-pinion nodular iron center section is the strongest 60 series casting we offer, with heavier main caps, ARP® main bolts, more reinforcement in critical areas over the already strong Currie 60 center
     
Load Bolt   Ring gear load bolt (top left) eliminates gear deflection, to dramatically increase torque handling capacity. The load bolt typically sits .002 inch from the ring gear and only touches when extremely high torque loads are applied
     
  Extreme 60 high-pinion radius bottom center section delivers unmatched ground clearance, and improved obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
     
  Replaceable AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
     
  High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminating oil starvation issues
     
  Large 3.5-inch diameter .375 wall axle tubes (left) are more than three times stronger than the factory Dana® 44 (right) without being overweight or sacrificing ground clearance
     
Powder Coat   Black satin powder coat finish adds long-lasting protection against rust and corrosion to keep your Currie Extreme 60 looking its best
     
     

Extreme 60 Front Features

 

  Front axle steering geometry is optimized for large tires and lifted vehicles with increased caster and pinion angles
     
  Massive forged 1-ton inner knuckles (right) are designed to stand up to the severe punishment of larger tires without flinching
     
  Upper control arm mounts feature rebuildable Johnny Joints® for maximum suspension articulation with unsurpassed durability
     
  Rock-proof Currie nodular iron front cover protects expensive internals, adds structural support to the housing's face flange and locates the driver’s side upper control arm mount
     
  13-inch diameter vented rotors and dual-piston calipers provide the increased brake capacity required for stopping large tires
     
  Warn® premium manual locking hubs are the industry standard for durability and reliability
     
     

Extreme 60 Rear Features

 

  Desert race-inspired 2-inch heat-treated chromoly spindles and billet steel full-floating hubs carry the weight of the vehicle, eliminating the influence of side loading and impact shock on axle durability. Safety is improved as the wheel and brake remain in place and fully functional in the rare event of an axle failure
     
  Currie Performance double splined full-floating heat-treated chromoly axles provide superior strength and durability over traditional flanged floater axles
     
    Modified JK OEM backing plates and parking brake assemblies provide reliable operation with broad availability of serviceable wear items
     
  Rock-proof Currie nodular iron cover protects expensive internals and adds structural support to the housing's face flange for increased rigidity

 

 

Looking for something different? Click on Live Chat or call (714) 528-6957 to speak with an expert to build the custom solution that meets your needs

 

Notes

ABS Sensors - Does not include ABS sensors, the factory sensors from the stock axle must be retained and installed on the Extreme 60 housing

Computer Programming: 2012 and newer vehicles require a computer programmer to reset the gear ratio and tire height in the vehicle's computer for the proper function of the vehicles stability control and transmission shift points

Brake Upgrade: The big brake kit included with the Extreme 60 uses 13.25-inch rotors with dual-piston calipers to provide the stopping power required for 37-inch and larger tires

Wheel and Tire Size: 17-inch or larger wheels are required for proper clearance of the brake calipers. Maximum recommended tire size is 40-inches

Overall Width: Axle width is 70-inches (+4.6 inches over stock) between wheel mounting surfaces. Additional width improves turning angle with 37-inch and larger tires

Steering Stabilizer: Ram assist brackets are not compatible with and exclude the use of the stock steering stabilizers

Differential Carriers: Carriers provided by Currie for the Extreme 60, are turned down to 8.300" O.D. for load bolt clearance. If a standard O.D. carrier is installed the load bolt will need to be backed out to prevent damage

Products specifications
Vehicle Fitment 2020 and newer Jeep Gladiator (JT) truck
Extreme 60 ___________________________________________________________________________________
Housing Extreme 60 Nodular Iron High-Clearance Center Section with Rotated Cover, Ring Gear Load Bolt and Integrated Skid Plate
Bearing Caps Increased cross section nodular iron caps secured with ARP® fasteners
Pinion Oiling High volume flow-thru recirculating oil system
Gear Set Dana 60™ reverse rotation thick gear sets (compatible with super 60 reverse cut gears)
Differential Carrier Only high speed differential carriers (designed for low numerical gears) are used, enabling the use of stronger thick ring gears for all gear ratios. Carrier outside diameter is turned down to 8.30 inches for load bolt clearance
Ring Gear Load Bolt Eliminates ring gear deflection under heavy load (3/4"-16 right hand thread with Jam nut)
Pinion Yoke 1350 u-joint
Skid Plate AR400 hardened steel skid plate
Differential Cover Currie nodular-iron cover, Red
Axle Tubes 3 1/2 inch diameter, .375 wall DOM tube
Suspension Brackets Heavy gauge 3/16 steel mounting brackets
Width 70-inches wide (between wheel mounting surfaces)
Wheel Bolt Pattern 8-lug (8 x 6.5 in.) with 9/16 studs
Finish Black satin powder coat
Front Extreme 60 ___________________________________________________________________________________
Axles Currie Performance 35-spline (1.5 in. diameter) 4340 Chromoly inner and outer axle shafts with 1480 u-joints
End Forgings Currie 1-ton heavy-duty forged steel inner C’s
Steering Knuckles Currie 1-ton nodular iron steering knuckles machined and keyed for high-steer arms
Unit Bearings 1-ton unit bearings with JK tone rings installed for ABS and ESP retention
Hubs Warn Premium locking 35-spline hubs
Brake Rotors 13-inch vented rotors (over 1.1 in. larger diameter than stock, provides increased brake force) with zinc plated caliper brackets
Brake Calipers F-350 Dual-piston calipers
Tie Rod 1-ton 1.357 in. OD x .375 wall heat treated chromoly tube with forged tie rod ends
Control Arm Mounts Johnny Joints® installed with ½” greasable bolts
Geometry Optimized for vehicles with 3 to 4-inches of lift (5 degrees of pinion angle and 5 degrees of caster angle)
Trac Bar Mount Integrated raised track bar and ram-assist mount. Trac bar mount height set for 3 to 4 inch lift, ram-assist mount setup for PSC 8-inch travel ram
Rear Extreme 60 ___________________________________________________________________________________
Axles Currie Performance double splined full-floating (35-spline 1.5-inch diameter) 4340 heat-treated chromoly
Floater Spindle Currie Performance 2.5-inch heat-treated 4140 Chromoly spindles, supports 35 or 40-spline axles
Floater Hub Currie Performance billet full-floating hubs with 35-spline drive flanges, JK tone rings installed for ABS and ESP retention
Brake Rotors 12-inch rotors with zinc plated caliper brackets
Brake Calipers New factory JK rear Calipers
Parking Brake Modified JK EOM backing plate and parking brake assembly
Geometry Optimized for 4-inchs of lift with 5 degrees of pinion
Products specifications
Vehicle Fitment 2020 and newer Jeep Gladiator (JT) truck
Extreme 60 ___________________________________________________________________________________
Housing Extreme 60 Nodular Iron High-Clearance Center Section with Rotated Cover, Ring Gear Load Bolt and Integrated Skid Plate
Bearing Caps Increased cross section nodular iron caps secured with ARP® fasteners
Pinion Oiling High volume flow-thru recirculating oil system
Gear Set Dana 60™ reverse rotation thick gear sets (compatible with super 60 reverse cut gears)
Differential Carrier Only high speed differential carriers (designed for low numerical gears) are used, enabling the use of stronger thick ring gears for all gear ratios. Carrier outside diameter is turned down to 8.30 inches for load bolt clearance
Ring Gear Load Bolt Eliminates ring gear deflection under heavy load (3/4"-16 right hand thread with Jam nut)
Pinion Yoke 1350 u-joint
Skid Plate AR400 hardened steel skid plate
Differential Cover Currie nodular-iron cover, Red
Axle Tubes 3 1/2 inch diameter, .375 wall DOM tube
Suspension Brackets Heavy gauge 3/16 steel mounting brackets
Width 70-inches wide (between wheel mounting surfaces)
Wheel Bolt Pattern 8-lug (8 x 6.5 in.) with 9/16 studs
Finish Black satin powder coat
Front Extreme 60 ___________________________________________________________________________________
Axles Currie Performance 35-spline (1.5 in. diameter) 4340 Chromoly inner and outer axle shafts with 1480 u-joints
End Forgings Currie 1-ton heavy-duty forged steel inner C’s
Steering Knuckles Currie 1-ton nodular iron steering knuckles machined and keyed for high-steer arms
Unit Bearings 1-ton unit bearings with JK tone rings installed for ABS and ESP retention
Hubs Warn Premium locking 35-spline hubs
Brake Rotors 13-inch vented rotors (over 1.1 in. larger diameter than stock, provides increased brake force) with zinc plated caliper brackets
Brake Calipers F-350 Dual-piston calipers
Tie Rod 1-ton 1.357 in. OD x .375 wall heat treated chromoly tube with forged tie rod ends
Control Arm Mounts Johnny Joints® installed with ½” greasable bolts
Geometry Optimized for vehicles with 3 to 4-inches of lift (5 degrees of pinion angle and 5 degrees of caster angle)
Trac Bar Mount Integrated raised track bar and ram-assist mount. Trac bar mount height set for 3 to 4 inch lift, ram-assist mount setup for PSC 8-inch travel ram
Rear Extreme 60 ___________________________________________________________________________________
Axles Currie Performance double splined full-floating (35-spline 1.5-inch diameter) 4340 heat-treated chromoly
Floater Spindle Currie Performance 2.5-inch heat-treated 4140 Chromoly spindles, supports 35 or 40-spline axles
Floater Hub Currie Performance billet full-floating hubs with 35-spline drive flanges, JK tone rings installed for ABS and ESP retention
Brake Rotors 12-inch rotors with zinc plated caliper brackets
Brake Calipers New factory JK rear Calipers
Parking Brake Modified JK EOM backing plate and parking brake assembly
Geometry Optimized for 4-inchs of lift with 5 degrees of pinion