Search
Filters

The RockJock® 70 high-pinion, full-floating rear axle is simply the strongest high-pinion rear axle available, designed for extreme off-road use with 40+ inch tires and performance V8 horsepower. The RockJock 70 is built to the legendary Currie Standard and loaded with exclusive features, including radius bottom center section, integrated ring gear load bolt, chromoly floater-spindles, and 40-spline chromoly full-floating axles plus much more. If you're building a serious rock crawler to take on extreme terrain, with a no back down attitude, the competition-proven RockJock 70 is the axle of choice


*** CONFIGURE OPTIONS TO BUILD AND PRICE ***

SKU: JK-RJ70R17
Estimated Lead Time: 8 to 10 weeks
*

Width Between Wheel Mounting Surfaces (WBWMS)

*
*
*
*
*
*
$5,349.95

The RockJock® 70 high-pinion, full-floating rear axle for the 2007 and newer Jeep JK Wrangler, is a complete bolt-in axle assembly with all required brackets and mounts in place. The vehicles factory driveshaft will require modification or replacement to accommodate the larger 70 series housing and 1350 series u-joint

 

Built to the legendary Currie Standard with features including:

RockJock 70 Center Section   RockJock 70 high-pinion nodular iron center section is competition proven and simply the strongest casting we offer, with heavy main caps, ARP® main bolts and thicker walls and webbing in critical area
     
Load Bolt   Ring gear load bolt (top left) eliminates gear deflection, to dramatically increase torque handling capacity. The load bolt typically sits .002 inch from the ring gear and only touches when the gear begins to deflect under high torque loads
     
RockJock 70 Ring and Pinion   Currie's competition-grade RockJock 70 gears (left) are cut from super tough 9310 alloy, and then custom heat-treated to a precise hardness, creating gears that can stand up to both the high shock loads of extreme off-road use and the wear of high mileage street use. Standard Dana® 60 gear (right)
     
35 Spline Pinion   Massive custom 35-spline pinion shaft (right), provides increased strength and reliability over the standard 29-spline unit (left)
     
Radius Bottom Center Section   The RockJock 70 high-pinion radius bottom center section delivers unmatched ground clearance, and improved obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
     
AR400 Skid Plate   Replaceable AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
     
Big Pinion Bearing   Large diameter outer pinion bearing (right) is designed for the demands of reverse rotation/high pinion housings. Stock low pinion bearing (left
     
Flow-thru Oiling System   High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminating oil starvation issues
     
Tube Comparison   Large 3.5-inch diameter .375 wall axle tubes (left) are three times stronger than the stock JK Dana® 44 (right) without being overweight or sacrificing ground clearance
     
Full Floating Hub   Chromoly spindles and billet steel full-floating hubs carry the weight of the vehicle, eliminating the influence of side loading and impact shock on axle durability. Safety is improved as the wheel and brake remain in place and fully functional in the rare event of an axle failure
     
40-spline axles   Nearly indestructible 40-spline (1.7-inch dia.) full-floating chromoly axles are, the perfect match for high horsepower, big tires, and extreme terrain
     
8 Lug Hub and Rotor   Includes new JK rear rotors drilled for the 8 lug bolt pattern, rotors and backing plates are machined to clear the full-floating hubs. Calipers and e-brake components are OE direct fit, making service parts easy to find
     
RockJock Iron Cover   Super strong RockJock nodular iron front cover protects expensive internals and adds structural support to the housing's face flange for increased rigidity
     
Heavy Duty Brackets   Heavy duty 3/16 inch brackets feature multiple mounting options for adjusting suspension geometry to accommodate a range of vehicle lifts

 

The RockJock® 70 high-pinion, full-floating rear axle for the 2007 and newer Jeep JK Wrangler, is a complete bolt-in axle assembly with all required brackets and mounts in place. The vehicles factory driveshaft will require modification or replacement to accommodate the larger 70 series housing and 1350 series u-joint

 

Built to the legendary Currie Standard with features including:

RockJock 70 Center Section   RockJock 70 high-pinion nodular iron center section is competition proven and simply the strongest casting we offer, with heavy main caps, ARP® main bolts and thicker walls and webbing in critical area
     
Load Bolt   Ring gear load bolt (top left) eliminates gear deflection, to dramatically increase torque handling capacity. The load bolt typically sits .002 inch from the ring gear and only touches when the gear begins to deflect under high torque loads
     
RockJock 70 Ring and Pinion   Currie's competition-grade RockJock 70 gears (left) are cut from super tough 9310 alloy, and then custom heat-treated to a precise hardness, creating gears that can stand up to both the high shock loads of extreme off-road use and the wear of high mileage street use. Standard Dana® 60 gear (right)
     
35 Spline Pinion   Massive custom 35-spline pinion shaft (right), provides increased strength and reliability over the standard 29-spline unit (left)
     
Radius Bottom Center Section   The RockJock 70 high-pinion radius bottom center section delivers unmatched ground clearance, and improved obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
     
AR400 Skid Plate   Replaceable AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
     
Big Pinion Bearing   Large diameter outer pinion bearing (right) is designed for the demands of reverse rotation/high pinion housings. Stock low pinion bearing (left
     
Flow-thru Oiling System   High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminating oil starvation issues
     
Tube Comparison   Large 3.5-inch diameter .375 wall axle tubes (left) are three times stronger than the stock JK Dana® 44 (right) without being overweight or sacrificing ground clearance
     
Full Floating Hub   Chromoly spindles and billet steel full-floating hubs carry the weight of the vehicle, eliminating the influence of side loading and impact shock on axle durability. Safety is improved as the wheel and brake remain in place and fully functional in the rare event of an axle failure
     
40-spline axles   Nearly indestructible 40-spline (1.7-inch dia.) full-floating chromoly axles are, the perfect match for high horsepower, big tires, and extreme terrain
     
8 Lug Hub and Rotor   Includes new JK rear rotors drilled for the 8 lug bolt pattern, rotors and backing plates are machined to clear the full-floating hubs. Calipers and e-brake components are OE direct fit, making service parts easy to find
     
RockJock Iron Cover   Super strong RockJock nodular iron front cover protects expensive internals and adds structural support to the housing's face flange for increased rigidity
     
Heavy Duty Brackets   Heavy duty 3/16 inch brackets feature multiple mounting options for adjusting suspension geometry to accommodate a range of vehicle lifts