Search
Filters

Fits 2005 thru current Toyota Tacoma


Package Includes:

  • Currie F9 Fabricated 9-inch Housing (W/O Back Brace)
  • Currie Performance 35-spline Axles
  • Billet Housing Ends
  • New Axle Bearings, Retainers and Seals
SKU: TA-F9325R
*
*
*
*
*
*
*
*
*
$2,080.00
PROP 65 WARNING:

The F9 fabricated rear axle assembly for the 2005 and up Toyota Tacoma features a Hi-Form 50 steel housing center, 3"x.250" wall DOM steel tubes and features custom housing ends that accept the stock Tacoma axle bearings and allows for the factory brake hardware and ABS and ESP sensors to bolt back on

Pictured with optional equipment installed:

  • Fill/Inspection cap
  • Back brace

Housing Features:

  • New heavy duty leaf spring pads mounted in the stock location
  • Currie performance forged alloy 35 spline axle shafts with the stock Tacoma bolt pattern and stock diameter register hub for proper brake indexing

 

NOTES:

Wheel Register - Requires aftermarket wheels with a 4.250" or larger center bore, not compatible with the factory Tacoma wheels

Drive Shaft - Due to the housings larger physical dimensions and the larger 1350 series pinion yoke, the vehicles drive shaft will require modification or replacement

Brakes - Reuses the stock Tacoma drum brakes or specific aftermarket disk brakes

Wheel Bearings - Shipped loose (not pressed onto the axle) to allow brake components to be installed

Shock Mounts - Housing does not include shock mounts

Brake Line Tabs - Housing does not include brake line tabs

Sway Bar - Housing is not compatible with the factory sway bar

 

The F9 fabricated rear axle assembly for the 2005 and up Toyota Tacoma features a Hi-Form 50 steel housing center, 3"x.250" wall DOM steel tubes and features custom housing ends that accept the stock Tacoma axle bearings and allows for the factory brake hardware and ABS and ESP sensors to bolt back on

Pictured with optional equipment installed:

  • Fill/Inspection cap
  • Back brace

Housing Features:

  • New heavy duty leaf spring pads mounted in the stock location
  • Currie performance forged alloy 35 spline axle shafts with the stock Tacoma bolt pattern and stock diameter register hub for proper brake indexing

 

NOTES:

Wheel Register - Requires aftermarket wheels with a 4.250" or larger center bore, not compatible with the factory Tacoma wheels

Drive Shaft - Due to the housings larger physical dimensions and the larger 1350 series pinion yoke, the vehicles drive shaft will require modification or replacement

Brakes - Reuses the stock Tacoma drum brakes or specific aftermarket disk brakes

Wheel Bearings - Shipped loose (not pressed onto the axle) to allow brake components to be installed

Shock Mounts - Housing does not include shock mounts

Brake Line Tabs - Housing does not include brake line tabs

Sway Bar - Housing is not compatible with the factory sway bar