Menu
Search
Filters
Close
Menu

Currie 60 & 70 Pinion Seal for 29-Spline Pinion Gear

Previous productCHP-8011 - High Pinion 9" P...
Next product60-8011 - Dana 60 Pinion Se...

Details:


Details:

  • Fits Currie 60 & 60 High-Pinion Front Housings
  • Dual Lip Nitrile Seal
  • Seal Inside Diameter 1.875 Inch
  • Seal Outside Diameter 3.505 Inch

SKU: 60-8011RJ
$47.00

This is the pinion seal for all Currie 60, Extreme 60, and 70 housings with 29-spline pinion gears. NOTE: This dual lip seal is proprietary to Currie and must be purchased from us!

This is the pinion seal for all Currie 60, Extreme 60, and 70 housings with 29-spline pinion gears. NOTE: This dual lip seal is proprietary to Currie and must be purchased from us!

Customers Also Purchased
Picture of 60-8013-35 - Inner Axle Seal for 35-Spline Currie 44, 60 & 70

60-8013-35 - Inner Axle Seal for 35-Spline Currie 44, 60 & 70

$25.00
Inner Axle Seal for Currie 44, 60 & 70 Frontends and Full-Float Rearends with 35-Spline Axles
Currie Racing Gear Oil GL-6 Non-Synthetic

Currie 9-Inch Racing Gear Oil

$14.00

High-performance non-synthetic racing 85W-140, gear oil meets the API GL-6 specification designed specifically for the requirements of 9-inch gear assemblies. It provides maximum shear stability and extreme pressure protection required to extend the life of your Currie rearend.


Details:

  • Premium Petroleum-Based Racing-Grade Formula
  • Excellent Thermal and Shear Stability
  • High Shock Load and Extreme Pressure Chemistry
  • Designed for High-Offset Hypoid 9-Inch Gear Geometry
  • 85W-140 GL-6 API GL-6 Rated
Currie 4x4 Performance Gear Oil

Currie 4x4 Performance Gear Oil

$17.00

High-performance full-synthetic 75W-140, GL-5 gear oil designed specifically for the requirements of 4x4 Jeeps and trucks. Currie 4x4 Performance Gear Oil provides maximum shear stability and extreme pressure protection with a superior inhibitor package that protects against rust, corrosion and foaming.


Details:

  • 100% Synthetic Formula Provides Superior Shock, Load, and Wear Protection
  • Contains an Effective Inhibitor Package that Protects Against Rust and Corrosion
  • Extreme Pressure Chemistry Delivers 4 Times the Film Strength of Conventional Gear Oils
  • Reduces Operating Temperatures and Delivers Improved Efficiency
  • 75W-140 API GL-5 Rated
Picture of Currie 1/2 x 3.0 In. Wheel Stud Set

Currie 1/2 x 3.0 In. Wheel Stud Set

$25.00

Set of (5) 1/2 x 3.0 in. wheel studs for Currie Axles


Details:

  • 1/2 In. x 20 TPI x 3.0 In. Long
  • 0.610 In. Knurl , Requires 19/32 In. Hole
  • Set of 5 Wheel Studs
1350 Series Pinion Yoke Kit for Currie 60/70 or Dana 60

1350 Yoke Kit - Currie 60/70 Axles - 29-Spline Pinion

$127.00

1350 Nodular Iron Yoke for Currie 60 , Currie 70 or Dana 60 Axles with 29-spline pinion


Details:

  • Compatible with 1350 Series U-Joints
  • Fits Currie 60/70 and Dana 60 axles with 29-Spline 1.325 In. Pinion Shafts
  • Includes Yoke, Pinion Nut, U-Joint straps and Hardware
1310 Series Pinion Yoke Kit for Currie 60 or Dana 60

1310 Yoke Kit - Currie 60 or Dana 60 Axles

$90.00

1310 Nodular Iron Yoke for Currie 60 and Dana 60 Axles


Details:

  • Compatible with 1310 Series U-Joints
  • Fits Currie 60 or Dana 60 with 29-Spline 1.325 In. Pinion Shafts
  • Includes Yoke, Pinion Nut, U-Joint Straps and Hardware
Picture of CE-8011 - 9" Pinion Seal

CE-8011 - 9" Pinion Seal

$9.00
9" Pinion Seal
Categories
Contacts
  • +1 714-528-6957
  • +1 (Fax) 951-549-0267
Information
Copyright © 2022 Currie Enterprises, Inc.. All rights reserved.