28-Spline Cut-To-Fit Axle for Ford Small Bearing Housing Ends
Included In Price:
- Single 28-Spline Induction Heat Treated Axle
- Available In 28 and 32-inch lengths
- 4-Inch Spline Length, Up To 3-Inches Can Be Removed
- Stock 64-72 Mustang (5 x 4.5") Wheel Bolt Pattern
- Includes one set of five 1/2 in. Ford style studs
- Includes: Wheel Bearing, Seals and Heavy-Duty Retaining Plates
-
*
-
Currie's 28 spline CTF (Cut To Fit) 9" Ford axles provide you with 2 axle lengths, both with 4" of spline length. Up to 3" of this spline length may be cut off so that you may attain an axle length anywhere between 25" and 32" and still have adequate spline engagement into your 3rd. member. All CTF axles feature high performance induction heat treated forged alloy steel construction, and feature a 2.525" brake space dimension which is stock for 64-72 Mustang, Falcons, Fairlanes, and Maverick rearends. Wheel bolt pattern is drilled the stock 5 on 4 1/2" pattern, and an access hole is drilled. All CTF axles come with a full installation package which includes a set of five 1/2"-20 Ford style wheel studs, one heavy duty small bearing style retainer plate, one high quality small axle bearing with retaining collar, and one axle seal. NOTES: Axle specifications are 2.525" brake spacing offset, bolts into standard small bearing housing end type, and features a 2.430" axle register diameter. 2) Axle bearing does not come pressed onto the axle shaft, and wheel studs are not installed.
Currie's 28 spline CTF (Cut To Fit) 9" Ford axles provide you with 2 axle lengths, both with 4" of spline length. Up to 3" of this spline length may be cut off so that you may attain an axle length anywhere between 25" and 32" and still have adequate spline engagement into your 3rd. member. All CTF axles feature high performance induction heat treated forged alloy steel construction, and feature a 2.525" brake space dimension which is stock for 64-72 Mustang, Falcons, Fairlanes, and Maverick rearends. Wheel bolt pattern is drilled the stock 5 on 4 1/2" pattern, and an access hole is drilled. All CTF axles come with a full installation package which includes a set of five 1/2"-20 Ford style wheel studs, one heavy duty small bearing style retainer plate, one high quality small axle bearing with retaining collar, and one axle seal. NOTES: Axle specifications are 2.525" brake spacing offset, bolts into standard small bearing housing end type, and features a 2.430" axle register diameter. 2) Axle bearing does not come pressed onto the axle shaft, and wheel studs are not installed.