Currie Off-Road Products

  Specifications

• Factory TJ Width 60.5 in.
• Chromoly Inner/Outer Axle Shafts
• Accepts Stock TJ Outer Assemblies
• Utilizes stronger JK Internals

      Link To Product Page

  Specifications

• Factory TJ Width 60.5 in
• Currie HP60 Center Section
• 35-Spline Chromoly Axles
• Stock 5 x 4.5 Wheel Bolt Pattern
• 11-Inch Explorer Disc Brakes
  

      Link To Product Page

  Specifications

• Factory JK Width 65.375 in
• Currie HD60 Center Section
• 35-Spline Inner/32-Spline Outer Chromoly Axle Shafts
• Accepts Stock JK Outer Assemblies
• Requires High Clearance Tie Rod
• Requires Drive Shaft Modification or Replacement

      Link To Product Page

  Specifications

• Factory JK Width 65.375 in
• Currie Low-Pinion 60 Center Section
• 40-Spline Chromoly Axles
• Stock 5 x 5 Wheel Bolt Pattern
• Retains the Factory Brake Assemblies
• Requires Drive Shaft Modification or Replacement

      Link To Product Page

  Specifications

• 70 in. Overall Width (4.625 Over Stock JK)
  
• Currie Extreme 60 Center Section with Ring Gear Load Bolt
• 8 x 6.5 Wheel Bolt Pattern
• 14 in. Vented Rotors Front and Rear with Jeep JT Calipers
• 35-Spline Inner/Outer Chromoly Front Axle Shafts
• 40-Spline Chromoly Full-Float Rear Axles
• Requires Drive Shaft Modification or Replacement

      Link To Product Page

   Specifications

• JL Rubicon Width 68 in. (+1.5 in. Over Non-Rubicon JL Models)
• Currie HD60 Center Section
• 35-Spline Inner/32-Spline Outer Chromoly Axles with 1-Ton 1480 U-Joints
• Accepts Stock JL Outer Assemblies
• Requires High Clearance Tie Rod
• Requires Drive Shaft Modification or Replacement

      Link To Product Page

Specifications

• JL Rubicon Width 68 in. (+1.5 in. Over Non-Rubicon JL Models)
• Currie Low-Pinion 60 Center Section
• 40-Spline Chromoly Axles
• Stock 5 x 5 Wheel Bolt Pattern
• Retains the Factory Non-Rubicon Brake Assemblies
• Requires Drive Shaft Modification or Replacement

      Link To Product Page

Specifications

• JL Rubicon Width 68 in.
• Currie Low-Pinion 60 Center Section
• 40-Spline Chromoly Axles
• Stock 5 x 5 Wheel Bolt Pattern
• Retains the Factory Rubicon Brake Assemblies
• Requires Drive Shaft Modification or Replacement

      Link To Product Page

 Specifications

• 70 in. Overall Width (2 in. Over JL Rubicon)
  
• Currie Extreme 60 Center Section with Ring Gear Load Bolt
• 8 x 6.5 Wheel Bolt Pattern
• 14 in. Vented Rotors Front and Rear with Jeep JT Calipers
• 35-Spline Inner/Outer Chromoly Front Axle Shafts
• 40-Spline Full-Float Rear Axles
• Requires Drive Shaft Modification or Replacement

      Link To Product Page

 Specifications

• Factory Gladiator Width 68 in.
• Currie HD60 Center Section
• 35-Spline Inner/32-Spline Outer Chromoly Axles with 1-Ton 1480 U-Joints
• Accepts Stock Gladiator Outer Assemblies
• Requires High Clearance Tie Rod
• Requires Drive Shaft Modification or Replacement

      Link To Product Page

Specifications

• Factory Gladiator Width 68 in.
• Currie Low-Pinion 60 Center Section
• 40-Spline Axles
• Stock 5 x 5 Wheel Bolt Pattern
• Retains the Factory Gladiator Brake Assemblies
• Requires Drive Shaft Modification or Replacement

      Link To Product Page

 Specifications

• 70 in. Overall Width (2 in. Over Gladiator)
  
• Currie Extreme 60 Center Section with Ring Gear Load Bolt
• 8 x 6.5 Wheel Bolt Pattern
• 14 in. Vented Rotors Front and Rear, Retains the Vehicles Calipers
• 35-Spline Inner/Outer Chromoly Front Axle Shafts
• 40-Spline Full-Float Rear Axles
• Requires Drive Shaft Modification or Replacement

      Link To Product Page